7 Series Corrugated Paper Board Printing Machine(Slotting)
This machine is manual operation and vacuum absorption auxiliary feeding system.(The wind strength can be adjusted). It can slot, cut the corner, cut the extra side and press the lines of the corrugated cardboard. The slotting width is electric adjustment, and it attached a ruler that the scale can be read easily. The phase adjustment of slotting part is planetary gear structure. The machine adopts 360 degrees electric adjustment. The up and down slotting knives and creasing knives can move synchronously(use exclusive tool to adjust left and right). This small machine is easy to operate and repair easily which is specialized for slotting small boxes.
Main configuration:
1.Electric phase adjusting mechanism, button operation system.
2.Controllable roller automatic lifting, automatic memory reset plate after scrubbing, personalized tidy paper, quota to complete the automatic standby function.
3.Main transmission adopts high quality steel, after quenching processing, precision hobbling processing, high hardness, high precision gear can reach four level accuracy.
4.Key-less connectors, eliminate the traditional gap connection, maintain long-term accurate color printing, the transmission mechanism adopts spray lubrication, automatic lubrication system.
5. Between the units Using cylinder lock, and the whole machine has a strong lock to the self - locking mechanism to ensure the stability of the unit.
6.This machine paper feeding part adopts advanced vacuum absorption leading edge paper feed mechanism, high pressure centrifugal fan auxiliary feeding paper, wind power can be adjusted.
7.Use quick response speed, high positioning accuracy, system stability, long service life, using electronic cam instead of mechanical cam control
8. Paper feeding shaft and the front shaft adopts a gear connection, eliminating any gap of paper feeding roller in the work, but also improve the feeding precision, and can avoid the board about the phenomenon of deviation.
9. Unique quick change type half wheel mechanism to ensure the consistency of feeding position, avoid feeding wheel circle wear is not the same, and replacement is very convenient.
The printing department
10. Printing phase, electric button operation, printing plate with the automatic reset memory function after the board.
11.Pneumatic lifting roller, printing down, not printed up. Printing Roller axial manual adjustment, the maximum displacement of about 10mm, and the locking mechanism.
12. Printing phase with electromagnetic clutch brake mechanism, the machine can automatically lock the situation of the lock when the machine, to prevent the loss of the printing plate.
13.Ink supply device and ink leather pad ink back flow mechanism, prevent water, ink and ink printing quality of fly out.
14.A printing plate roller, embossing roller, surface grinding, dynamic balance in coarse and fine equipment correction, make sure you get the best balance point
15. It has a digital display of the function of the planetary gear type accompanied by the adjustment of the plate, the electric phase adjustment.
16. Assist to send paper system pressure type automatic lifting device, paper feeding roller decreased in contact with the printing plate, stop feeding roller rise and a printing plate separation) and idle device.
| Model |
7-920 |
| Plate |
Porous Printing |
| Color & Page |
1~4 Color Printing Press |
| Usage |
Paper/Board Printer |
| Mechanical Inside Width |
2400mm |
| Max. Paper Size |
900×2000mm |
| Min. Feed Height |
170×450mm |
| Max. Printing Area |
880×1800mm |
| Skip Feeding Size |
1100×1800mm |
| Color Precision |
+1-1mm |
| Standard Plate Thickness |
6mm |
| Thickness of The Board |
2-11mm |
| Min slotting interval |
150×50mm (Negative knife)
80×80mm (Positive knife) |
| Max. Production Speed |
250 Sheets/Min |
| Economical Working Speed |
200 Sheets/Min |
Audited Supplier 
){kind=link}